Home
1
Astek Book
2
Safety & standard3
https://www.astekglobe.com/ Astek Globe
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
UKCA(UK Conformity Assessed)   After the Brexit transition period ends, from January 1, 2021, there is a new safety approvals for switching power supplies and medical adapters/open frames in UK market, when importing to the UK market must comply with the requirements of UKCA (UK Conformity Assessed). UKCA covers most of the current EU CE regulations. The UK market includes England, Wales and Scotland, but excluding Northern Ireland. The UKCA mark is only applicable to the UK which cannot be applied to the European Union, European Economic Area or Northern Ireland market.   *UKCA requirements* Under the following conditions, the product shall be with “UKCA” logo from January 1, 2021. • Products sold in the UK • Products within the scope of British law • Must pass a third-party qualification assessment • Those who originally used the UK Notified Body and hasn’t transfer the conformity assessment file to the EU Notified Body before January 1, 2021 The above requirements don’t include the existing inventory entered the UK market before January 1, 2021, regardless of whether the verification is carried out by a UK institution.   UKCA, but starting from January 1, 2022, all products need to use the UKCA logo.   North Ireland products (unrestricted) CE or CE+UKNI   *UK Conformity Assessed, UKCA UK Conformity Assessment*   • UKCA (British Conformity Assessment) is a new British product conformity mark, used to show that the product complies with relevant British standards and regulatory requirements. • From January 1, 2021, products sold to the UK market (England, Wales and Scotland, but excluding Northern Ireland) must meet relevant UK standards and regulations before they can use the UKCA mark. The testing standards and verification process are basically the same as the current CE requirements. • The UKCA mark is only applicable to the UK and cannot be applied to the European Union, European Economic Area or Northern Ireland market.   Astek Power Supplies and Medical Adapter and Open Frames meet with UKCA approvals. For more information required, please contact info@astekglobe.com. https://www.astekglobe.com/hot_389550.html UKCA(UK Conformity Assessed) 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_389550.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_389550.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_389550.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
New Safety Standard IEC/EN/UL62368-1 3.0 on Switching Mode  Power Supplies   Concerning switching power supplies, the date of withdrawal (DoW) for the outgoing standards IEC 60950-1 and IEC 60065 is December 20, 2020. IEC62368-1 is not regarded as an “merge” IEC60950 and IEC60065 because a new “hazard-based” standard would cover both electronic equipment and IT/Communications technology.   IEC62368-1:2018 3rd edition will replace IEC62368-1:2014 from Dec. 20 of 2020, which was published in Oct. of 2018. IEC 62368-1:2018 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V (includes equipment rated 400/690V).   From now on, manufacturers of power supplies shall consider to comply with IEC62368-1:2018 3rd edition when procuring components and subsystems. IEC62368-1 is basically a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards intended to reduce the possibilities of pain, injury and if fire, property damage.   Not only Euro and CB (Certification Body) members, in North America (USA and Canada), estimated and adopting of UL/CSA62368-1 Ed. 3.0 on Dec. 20, 2020. The other countries follow IEC/EN62368-1 respectively.   Astek Global develops and leads our switching power supplies into IEC62368-1 Ed.3.0. If you are interested in, please advise us info@astekglobe.com. Thank you.   https://www.astekglobe.com/hot_273190.html New Safety Standard IEC/EN/UL62368-1 3.0 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_273190.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_273190.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_273190.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
 KCC mark Korean EMC called MSIP (formerly KCC)Unlike other countries, there are separate certification managements based on the different requirements of EMC, wireless RF, and communications TELEC, South Korea has integrated EMC/RF/TELECOM certification into MSIP certification for the convenience of management. The certification name of Korean wireless communication certification has gone through the development process from MIC to KCC and then to MSIP. Firstly, let’s introduce KCC, the predecessor of MSIP. KCC certification is a mandatory certification for wireless telecommunications equipment and products implemented in accordance with South Korea’s "Basic Telecommunications Law" and "Radio Wave Law". Later, because KC separated Safety and EMC, EMC was also included in the KCC certification category. The Korean Communications Commission KCC is responsible for the management of telecommunications products, and authorized the Radio Research Agency (RRA, Radio Research Agency) as its certification body to implement specific certification work for products. KCC certification is tested by a Korean laboratory accredited by its predecessor MIC certification, and a type approval certificate is issued by RRA. From July 1, 2013, the organization responsible for EMC/RF/TELECOM certification in South Korea has been converted from KCC (Korea Communications Commission) to MSIP (Ministry of Science, ICT & Future Planning). According to this, KC The beginning of the ID code in the LOGO will be changed from KCC to MSIP, and the rest remain unchanged.According to the category of the product, MSIP is mainly divided into the following 3 certification types:1. Conformity Certification: wireless communication equipment, such as telephones, regulators, fax machines, etc.2. Conformity registration: electrical appliances.3. Interim Certification: for equipment that has no standard currently Any inquiries about Korean power adapters, please touch us info@astekglobe.com.   https://www.astekglobe.com/hot_365252.html Korean EMC called MSIP (formerly KCC) 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_365252.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_365252.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_365252.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
  Medical EMC: IEC60601-1-2 4.1 In recent years, the medical power supply safety standard about EMC  has undergone historic changes to EMC: IEC60601-1-2 4.1. EMC: IEC60601-1-2: 2014 (ED 4.0) was issued by the International Electrotechnical Commission (IEC) on February 25, 2014 and became effective on April 1, 2017. In 2018, Europe, the United States and Canada adopted the fourth edition of 60601 -1 electromagnetic compatibility (EMC). In other countries/regions, there are previous versions of medical safety standards, but they will gradually adopt EMC: IEC60601-1-2 (ED 4.0). As time changes, EMC should consider three types of environments for medical equipment: *Professional healthcare-hospitals, clinics and other medical facilities*Home health care-houses, nursing homes for the elderly and other public places*Special environment-the operation of medical systems and equipment in military facilities and industrial areas under these conditions; including mobile equipment and other equipment are divided into: **Intended use is for the intended medical purpose**Normal use is for transportation, maintenance, standby and other purposesExcept for use in environmental categories, the changes of IEC60601-1-2: 2014 EMC Fourth Edition are as follows: 1) Improve the level of immune testing: *The test range of radiated immunity is up to 2.7GHz (2.5GHz in the third edition)*The anti-electromagnetic interference capability is 30A/m* Conducted immunity at 6V in ISM band* ESD under 8kV contact and 15kV air (the third edition is 6kV and 8kV respectively) 2) Changes in immune test:*Immunity test level conforms to IEC 60601-1-11*Immunity testing now follows the same port-by-port convention as the IEC 61000-6 series of general EMC standards 2) Expand risk management:*The manufacturer must submit the test plan and risk analysis documents before testing*The operation mode is based on risk analysis.*Electromagnetic interference should be reasonably foreseen during the risk management process.*The risk management process determines whether subsystem testing is allowed. Though the EN version has been published and estimate to become mandatory in the EU in three years, the FDA recognized the latest IEC 60601-1-2:2014 + A1:2020 standard at the end of 2020. Let’s follow what happen next closely. If you are interested in Astek medical power supplies, please contact us "info@astekglobe.com". https://www.astekglobe.com/hot_448146.html Medical EMC: IEC60601-1-2 4.1 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_448146.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_448146.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_448146.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
 MOOP and MOPPNew IEC60601-1 3rd version catagorized into MOOP and MOPP. IED60601-1 is the global medical equipment standard. The concept of Means of Protection (MOP) leads to IEC60601-1 3rd, which divided into MOPP(Means of Patient Protection) and MOOP(Means of Operator Protection). According to it, Some countries reorganized to their own standards, like USA: ANSI/AAMIES 60601-1:2005 EU:  EN60601-1: 2005 Canada: CSA-C22.2 No. 60601-1:08 The new difference between MOOP and MOPP in IEC60601-3rd edition is creapage and isolation for medical switching power supply. We listed the differences as below: classifications isolation Creapage/clearance insulation 1*MOOP 1500VAC 2.5mm/2mm basic 2*MOOP 3000VAC 5mm/4mm double 1*MOPP 1500VAC 4mm/2.5mm basic 2*MOPP 4000VAC 8mm/5mm double When equipment is used at laboratory and not touch patient, it's enough for power supply to meet 2*MOOP. Meanwhile, the highest level 2*MOPP can be used for patients.Astek Medical power supplies are the compliances of MOOP and MOPP. We offer the suitable solutions with customers' demand. Please inquire us when necessary. https://www.astekglobe.com/hot_204639.html MOPP and MOOP 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204639.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204639.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_204639.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
@font-face{font-family:DFT_TX-TFTNT;src: url('/url_fonts/DFT_TX-TFTNT.eot');src: url('/url_fonts/DFT_TX-TFTNT.eot?#iefix') format('embedded-opentype'),url('/url_fonts/DFT_TX-TFTNT.woff') format('woff');}      CBAbout Power Supply Unit, CB is a mother safety approval. Why do we say so? CB is a mutually admitted between countries and established by IECEE. It has 34 countries and 45 Authorized lab in this System for re-applying other certificates. CB is based on IEC standards. When countries standards of the individual are different with IEC, CB also allows them but shall publish to the other members. CB report can approve products samples pass the adequate test and meet the relative regulations of IEC and memberships. Its purpose is to speed up the international trades and reach "one test for multiple purposes".Based on CB standard, Astek power supply designs take power supply circuit, components, diagram and function etc into consideration. Power Supply quality and safety are the most important issues.  Its membership includes Austria, Australia, Belgium, Canada, Swiss, China, Czech Republic, Germany, Demark, Spain, Finland, France, England, Greece, Hungary, Ireland, Israel, Italy, Japan, South Korean, Mexico, Netherland, New Zealand, Norway, Poland, Portugal,Russia, Romania, Singapore, Slovenia, Slovakia, South Africa, Turkey, Ukraine, America, Yugoslavia and so on. Brief introduction about power supplies with IT and medical CB grades:Adapters AEA300  230-310W Desktop Adapter AEA250  160-250W Desktop Adapter AEA170  130W-180W Desktop Adapter AEA135  120W-150W Desktop Adapter AEA101  120W-130W Desktop Adapter ATA120  100W-120W Desktop Adapter ATA090  90W       Desktop Adapter ATA065  60W       Desktop Adapter ATA050  50W       Desktop Adapter ATA036  36W       Desktop Adapter APA045  45W       Wall Mount/Travel/Desktop Adapter APA024  15W-24W   Wall Mount/Travel/Desktop Adapter APA015  15W-18W   Wall Mount/Travel/Desktop Adapter APA012  12W-18W   Wall Mount/Travel/Desktop Adapter APA005  5W-6W     Wall Mount/Travel AdapterOpen frame Wide Input Voltage Range: 100~240VAC Output watt: 15W~250W Output Voltage: 3V~56V Single/Dual/Triple/Quad Output Compact Size Design   For Detailed product information, please touch us or visit the Products Web pages. Thank you.  https://www.astekglobe.com/hot_192735.html CB 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_192735.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_192735.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_192735.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
            CE CE means Conformity with European Demand, which declared by Manufacturers and/or their representatives; the products comply with essential requirements of the relevant European health, safety and environmental protection legislation by Product Directives. While manufacturers and/or authorized labs make all of the necessary inspection and tests, they keep the relative data and reports on files, they can mark CE on the products and free move on European Economic Area and Iceland and Norway. Furthermore, distributors and importers must confirm the presence of “CE Marking” and “The required Supporting documentation”. When the government finds the violations of CE requirements, they will list, alter and prohibit to enter the whole market.  CE on power supplies includes EMC, LVD, Harmonics, CoC 5 step 2, RoHS, REACH, and WEEE. Astek Power Supplies are CE compliance. If you are interested in, please feel free to contact us for further product information. https://www.astekglobe.com/hot_303916.html CE 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_303916.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_303916.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_303916.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
EMC (Electromagnetic Compatibility)  EMC is an abbreviation for Electromagnetic Compatibility, which is “no electromagnetic interference to other equipment, even if it is subjected to electromagnetic interference from other equipment and still maintains the original performance”, which is called “electromagnetic compatibility”.  “Do not make the other equipment electromagnetic interference” means this performance shall consciously ensure. EMI (Electromagnetic Interference) is a term that refers to electromagnetic interference. Since the emission of electromagnetic waves causes interference, it is often used in pairs with the term Emission (radiation, emission). In terms of switching power supply, it means switching noise due to on/off operation. In contrast, the term "even by electromagnetic interference from other devices" is EMS (Electromagnetic Susceptibility) - electromagnetic sensitivity. EMS is often used in pairs with Immunity (tolerance, immunity, and elimination). It is required to have the ability to withstand "no problem such as malfunction even if it is subjected to EMI".CI (Conducted Immunity) and RI (Radiated Immunity) are the categories of EMI. EMI is divided into Conducted Emission and Radiated Emission. Conducted noise refers to noise transmitted through a wire or PCB layout. Radiation noise refers to the noise emitted (radiated) into the environment. For these noises, there are immunity requirements in the EMS. Every country always has its own regulation, like CE for Euro, FCC for USA, VCCI for Japan, BSMI for Taiwan. Some are included into the safety approval, like RCM and KC and so on. For our inquiries about EMC about switching power supplies, please contact us. https://www.astekglobe.com/hot_316373.html EMC 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_316373.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_316373.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_316373.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
FCC (Federal Communications Commission) about Switching Power Supplies On power supplies, FCC Part 15 class B in USA regulates everything from spurious emissions. The FCC Part 15 rules and regulations have been designed to align with the European CISPR 22 regulations. EMC (Electromagnetic Compatibility) is with EMI (Electromagnetic Interference) and EMS (Electromagnetic Susceptibility). EMI Testing items: Conduction, Radiation, Harmonic current, Voltage Fluctuations EMS Testing items: ESD IEC/EN61000-4-2 RS IEC/EN61000-4-3 EFT IEC/EN61000-4-4 Surge IEC/EN61000-4-5 CS IEC/EN61000-4-6 MF IEC/EN61000-4-8 DIPs IEC/EN61000-4-11 Types of Certification: 1. FCC Verification 2. FCC DoC 3. ID Certification Control method 1. Issuing FCC report by FCC authorized Competent Body Laboratory 2. DoC or FCC ID issued. 3. Customs inspection 4. Market sampling 5. Routine requirements mass production sampling Astek Switching power supplies are with/meet FCC compliance. If you are interested in, please inquire us info@astekglobe.com. https://www.astekglobe.com/hot_309615.html FCC about Switching Power Supplies 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_309615.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_309615.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_309615.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
@font-face{font-family:DFT_TX-FMEQL;src: url('/url_fonts/DFT_TX-FMEQL.eot');src: url('/url_fonts/DFT_TX-FMEQL.eot?#iefix') format('embedded-opentype'),url('/url_fonts/DFT_TX-FMEQL.woff') format('woff');}          VCCI (Japanese EMI) Japan VCCI approval is for electromagnetic of IT power supply units, belongs to EMC, which is voluntary. Only VCCI authorized Lab can issue it and make reports. Meanwhile, only switching power supply manufacturers with VCCI membership can use VCCI Mark and have to pay annual fees.Most of our open frames are with VCCI. If necessary, please touch us info@astekglobe.com asap.  Rating 100V – 300V, 50 Hz or 60 Hz Plug shape   Voluntarily/enforced Voluntarily Required Report Only EMC report Local Distributor X Factory Inspection X          https://www.astekglobe.com/hot_204805.html VCCI 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204805.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204805.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_204805.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
    RoHS 3.0 (The Restriction of Hazardous Substances in Electrical and Electronic Equipment) on Astek Power Supplies Unit Astek Switching Power Supplies are the compliance of RoHS 3.0. In the world, many countries have their own RoHS directives. There are small differences among them. Mostly, they follow RoHS in Europe and America. Especially, CE includes RoHS and WEEE to lessen the shock from the wastes of Electrical and Electronic Equipment. Switching Power Supplies are categorized into RoHS. In 2003, EU released RoHS 2002/95/EC, which is replaced by Directive 2011/68/EU on July 11 of 2011 and renewed the contents from Directive (EU) 2015/863 on June 4 of 2015. In 2018, RoHS 3 is announced and enforced on July 22 of 2019 for IT and consume electronics. Medical grade will be July 22 of 2021. RoHS 3 expands the prohibited substances from six to ten by increasing new types of phthalates. RoHS 6 prohibited substances: Lead (Pb) <1000ppm Cadmium (Cd)<100ppm Mercury (Hg)<1000ppm Hexavalent Chromium (Cr6+) <1000ppm PBB <1000ppm PBDE <1000ppm New 4 phthalates add into RoHS 3: Bis(2-ethylhexyl) Phthalate (DEHP) <1000ppm Butyl benzyl phthalates (BBP)<1000ppm Dibutyl phthalates (DBP) <1000ppm Diisobutyl phthalates (DIBP) <1000ppm For more information, please inquired us. https://www.astekglobe.com/hot_305305.html RoHS 3.0 on Astek Power Supplies Unit 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_305305.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_305305.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_305305.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
CoC (Code of Conduct) Version 5 on Switching Power Adapters Concerning External Power Supply, European ErP issued the draft of No. 278/2009 and announced “External Power Supplies should meet CoC Version 5 Tier 2 as the above tables from July of 2018”. From these tables, you can see efficiency rates is much higher and No consumption load lower and add “Minimum Efficiency in Active Mode at 10% load of full rated output current” because it’s the trend to better efficiency and consume less power. In order to meet DOE VI and CoC version 5, Astek designs and layout high level power adapters. Astek Power Supply Unit are the compliance of CoC Tier 2 and DOE VI. If you are interested in, please inquire us asap.   https://www.astekglobe.com/hot_304977.html CoC Tier 2 on External Power Adapter 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_304977.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_304977.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_304977.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
NRCan NRCan is the Natural Resources Department of Canada (NRCan, the authority administration) for energy efficiency reporting. Manufacturers and importers must independently verify that their products meet applicable energy efficiency requirements before they are completed and submitted to NRCan, the authority administration for energy efficiency reporting. This certification verifies the products meets Canadian standards provided by a certified body accredited by the Canadian Standard committee. All regulated energy products manufactured in Canada, imported into Canada or sold in Canada must stick the energy saving verification mark issued by an accredited certified body. The 14th edition of NRCan (the Natural Resources Canada) Energy Efficiency Regulations was issued to the Canadian Gazette (Part II) on October 31 of 2018, which means the amendments will take effect soon. With regulatory changes and reduced impact on manufacturers, it is expected to be enforced six months later, that is, the effective date is May 1, 2019. In the 14th edition of the revision, on household and commercial information products, it affected "External Power Supplies" and "Battery Chargers" with the following details: External Power Supplies: Synchronized with the US Department of Energy (US DoE), from the original energy efficiency level 4 requirements to the sixth level. You can also use the US federal regulations (10 C.F.R. Appendix Z). Battery Chargers: The required content is the same as the Battery Chargers category to be enforced by the US Department of Energy on June 13, 2018. Test methods can be used in Canadian Standard CSA C381.2-17 or US Federal Regulations (10 C.F.R. Appendix Y). Battery Chargers manufactured, assembled or sold after June 13, 2019 are subject to regulatory requirements. For more inquiries about switching power supplies and chargers, please touch us asap. https://www.astekglobe.com/hot_315750.html NRCan 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_315750.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_315750.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_315750.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
   Astek Power adaptors are with GEMS VI.GEMS (Greenhouse and Energy Minimum Standards Bill 2012) Astek battery chargers and adapter are the compliance of GEMS VI. GEMS is Greenhouse and Energy Minimum Standards in Australia and New Zealand. In order to increase the efficiency of Electronic Equipment and saving power consumption, official authorizations released GEMS and replace MEPS from Oct. 1 on 2012, which divided into 3 levels. Adapters and chargers are level 3 and enforced to apply GEMS. The applicants shall test the adaptors and chargers and keeping the records. When all passed, they are registered on the Australian Regulator website.  Astek Globe prepare the GEMS test reports and helps Australia and New Zealand local customers to apply GEMS. For more inquiries, please don’t hesitate to contact us.  https://www.astekglobe.com/hot_305545.html Astek Power adaptors are with GEMS VI. 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_305545.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_305545.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_305545.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
 UL and cUL UL certification is for America market and cUL for Canada. Astek Adapters and Open Frames are with UL and cUL safety certifications. The standards of UL and cUL are not the same but similar. We comply with the standards both UL and cUL. From Sep. 16 of 2013, Canada government asked the applicants and manufacturers to write safety warning and caution marketing in French on the products, instruction manuals, or packages.   On Astek power supplies, there are UL60950-1, UL60065-1, UL62368-1, and UL60601-1 and so on. From Dec. 20 of 2020, UL60950-1 and UL60065 will be replaced with UL62368-1, which is based on Hazard-Based Safety Engineering (HBSE). Most of Astek Power Supplies catch the newest steps and with UL/IEC62368-1.   Concerning UL/cUL symbol marks, adapters are different with open frames. The left-above mark is for adapter, another is open frame.   For more inquiries, please feel free to touch us asap.  https://www.astekglobe.com/hot_304633.html UL and cUL 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_304633.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_304633.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_304633.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
VDEThe full name of VDE is Verband Deutscher Elektrotechniker, whose VDE Testing and Certification Institute is one of the most experienced test certification and inspection bodies in Europe since its inception in 1920 in Germany. It is a CE notified body authorized by the European Union and a member of the international CB organization. In Europe and internationally, VDE has obtained the CENELEC European certification system for electrical products, the European coordination system for CECC electronic component quality assessment, and the worldwide IEC electrical products and electronic component certification system. The products evaluated include a wide range of electrical and IT equipment, industrial and medical technology equipment, assembly materials and electronic components, wire and cable, etc. for household and commercial use. As a neutral, independent organization, VDE's laboratories perform integrated verification of electrical products in accordance with German VDE national standards or European EN standards, or IEC International Electrotechnical Commission standards. In many countries, the VDE verification mark is even more famous than the domestic verification mark, especially recognized by importers and exporters. It completes a total of 18,000 verification projects per year for nearly 2,200 German companies and 2,700 customers in other countries. To date, 200,000 electrical products in nearly 50 countries have received the VDE logo. The safety awareness of electrical technology products is based on protecting consumers themselves. VDE values safety and quality and offers a full range of specialized services. In addition to providing the renowned VDE marking inspection service, VDE provides inspection services based on domestic and international standards, and has obtained license bases for electrical technology products in many countries around the world. In international business, VDE has established close working relationships with inspection and certification organizations in 50 countries around the world. For more inquiries on Power Supplies, please touch us. https://www.astekglobe.com/hot_315534.html VDE 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_315534.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_315534.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_315534.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
                   PSE  (Japanese Safety approval)Concerning power supply certificate, adaper Japan must be with PSE approval. Though the shapes of adapter USA is almost the same with Japan's. PSE is the critical difference to distinguish.   From Apr. 1 of 2001, Japan "DENTORI" changed the name into DENAE, using PSE Mark, strengthen the penalty on Importers. PSE (Product Safety of Electrical Appliance & Materials) approval (so called "Conformity Inspection in Japan) is the obliged law when electronic products entering Japan. There are two categories, one is Specified Products(SP) with PSE in diamond, another is Non-Specified Products (NSP) with PSE in circle. The former included 115 kinds of products, another 338 ones. PSE included EMC and Safety.  External Power Supplies belongs to SP which must approved by the third Party Authorized Lab by METI, like UL, TUV etc.. It also needs Factory Inspection. Below PSE logo, it shall indicate importer's name.  After getting PSE certificate and before importing into Japan, the Japanese importers shall pay the charge of PSE duplicate and ask vendors to apply it. And then, they register it for importing permission.  Most of our adapters are with PSE. If necessary, please touch us info@astekglobe.com.Wide Input Voltage Range: 100~240VAC Output watt: 5W~310W Output Voltage: 3V~56V Single/Dual/Triple Output Mechanical: Desktop: C14/C8/C6/C18, Non-detachable (Cord-in Cord-out) from 5W to 310W Wall Mount: Fixed plug US/EU/UK/AU 2pins/3pins plug Adaptors from 5W to 90W Interchaneable US/EU/UK/AU/Korea/India/South Africa/ China 2pins/3pins plug USB Socket battery charger   https://www.astekglobe.com/hot_204803.html PSE 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204803.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204803.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_204803.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
  GS Safety approval on Power Supply Units GS means "Geprufte Sicherheit" in German (safety has been certified). GS certification is based on the German Product Safety Law (SGS) and is a voluntary certification for testing in accordance with the EU unified standard EN or German industrial standard DIN. It is a recognized German safety certification mark in the European market.   GS mark indicates that the safety of the product has been tested by an independent organization with credibility. Although the GS mark is not a legally mandatory requirement, it can indeed make the manufacturer subject to strict German (European) product safety laws when the product fails and causes an accident. Therefore, the GS logo is a powerful marketing tool that can enhance customers' confidence and desire to buy. Although GS is a German standard, most European countries accepted. And while meeting the GS certification, the products will also meet the requirements of the European Community CE marking. Unlike CE, there is no legal requirement for the GS mark, but the safety awareness has penetrated into consumers, an electrical appliance with the GS mark may be more competitive in the market than another products. The European Community CE regulations, 1997.1.1. began to control "Low Voltage Directive (LVD)". GS already contains all the requirements of the "Low Voltage Directive (LVD)". Therefore, after obtaining the GS mark, TUV will issue the CE certificate (COC) of LVD without any charge. After 1997, TUV Rheinland's certificate includes the LVD certificate into the GS certificate, that is, the manufacturer obtained the LVD certificate when applying for GS. GS certification body1. German certification agencies: They are usually well-known domestic German GS certification agencies include TUV Rheinland (TUV RHEINLAND), TUV SUD (called TUV SÜD in China, also known as TUV PS), VDE, etc., directly from Germany Recognized GS certification organization.2. Other certification bodies: They are usually other European GS certification bodies that cooperate with Germany include Italy IMQ, SGS, KEMA, ITS, NEMKO, DEMKO, Eurofins, etc. Astek power supply units are/with TUV-GS certificate. If you are interested in, please feel free to touch us info@astekglobe.com. https://www.astekglobe.com/hot_368079.html GS Safety approval on Power Supply Units 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_368079.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_368079.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_368079.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
  CCC (China Compulsory Certification) Since May 1 of 2002, CCC replaced CCEE, CCIB and CEMC. There are two main categories on CCC approval, one is product testing; another factory auditing. Meanwhile, it contains Safety, EMC and Environment regulations. Before being imported, sold and/or used in China, manufacturers must obtain CCC (China Compulsory Certification) certification. CQC (China Quality Certification Center) is the competent authority of CCC certificate. Appling CCC certificate processes including relative application documents, factory preparation and charges. It’s with 7 years Certificate validity and factory audit every year. The new version of the standard "GB4943.1-2011: Information Technology Equipment Safety" for China's information technology equipment and telecommunications terminal equipment products CCC compulsory product certification was released on December 30, 2011, and is scheduled to be implemented on December 1, 2012. Replace the old version of "GB4943-2001" standard. If you use CB report to apply for CCC certification, please pay attention to the following requirements: 1. It should be noted whether the difference test between China's national standard and IEC60950-1:2005 has been covered in the CB report. Unless, the relevant tests must be supplemented first. 2. As China's national standards have been updated with special requirements such as related climatic conditions and altitude, it is necessary to check the approved components and materials indicated in the CB report to meet the requirements of GB4943.1-2011. Astek switching power supplies are the compliance of CCC. If you are interested in, please feel free to e-mail us info@astekglobe.com . https://www.astekglobe.com/hot_309720.html CCC and Astek Switching Power Supplies 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_309720.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_309720.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_309720.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
      RCM (Australia/New Zealand Safety Registration)Australia and New Zealand are one of our main markets. Our external power supplies focus on the changes of safety certificates, efficiency level and environmental standards. From Mar. 1 of 2016, under EESS standards, RCM replaced c-tick and Australian safety approval. Before selling external powers supplies there, the local vendors shall register RCM with safety (apply through CB), EMC and the relative product information on EESS website. If adapters are wall mount, it requires a plug test report by authorized safety organization.   Our adapters are with Australian plug and RCM compliance. Also, we are willing to make our Australian and New Zealand customers register it successfully. Whichever you are local representatives or not, if you have any problems on this issue, please inquire us soon. Thank you.  Wide Input Voltage Range: 100~240VAC Output watt: 5W~310W Output Voltage: 3V~56V Single/Dual/Triple Output Compact Size Design Efficiency level: meet the newest level, such as DOE VI, CoC V, GEMS VI Environmental Regulation: meet ErP, ROHS, REACH, PFOS, SVHC etc. Mechanical: Desktop: C14/C8/C6/C18, Non-detachable (Cord-in Cord-out) from 5W to 310W           Wall Mount: plug pack US/EU/UK/AU 2pins/3pins plug Adapters from 5W to 90W           Interchangeable US/EU/UK/AU/Korea/India/South Africa/ China 2pins/3pins plug USB Socket https://www.astekglobe.com/hot_204640.html RCM 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204640.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204640.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_204640.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
    BSMI Safety Approval for Switching Power Adapter In Taiwan BSMI is the abbreviation of "Bureau of Standards, Metrology and Inspection" in English of the Bureau of Standards, Metrology and Inspection of the Ministry of Economic Affairs of Taiwan. According to the announcement of the Ministry of Economic Affairs of Taiwan, from July 1, 2005, products entering the Taiwan area will be subject to electromagnetic compatibility and safety regulations. According to the National Standard CNS of the Republic of China established by the Bureau of Standards, Metrology and Inspection of the Ministry of Economic Affairs, all items that are declared to be inspected by the Ministry of Economic Affairs, whether manufactured by domestic manufacturers or imported from other countries, must pass the BSMI inspection prior to be displayed and sold in Taiwan's domestic market. According to different products, there are three authentication methods as follows:*Type approval batch by batch inspection *Registration of Product Certification, RPC The power supply adapter belongs to this range. The product is announced as a verification registration inspection item for type approval. Imported and domestic products must first obtain the test report from the laboratory designated by the Bureau of Standards, Metrology and Inspection and apply for the product type to the Bureau of Standards, Inspection and Quarantine. After obtaining the certificate, the copy of the certificate can be used to apply for verification and login. Certificate validity: three years *Declaration of conformity According to the revision meeting of the relevant inspection regulations for the inspection of audio-visual products by the researcher on July 14, 2020, the existing standard CNS 14336-1 will be changed to CNS 15598-1, which corresponds to IEC 62368-1 3rd edition. The new regulations have been announced at the end of July 2020, and it is expected that they will be officially issued and open for application at the end of December 2020, and the new standards will be enforced on July 1, 2023. -The CNS 14336-1 certificate issued before July 1, 2023 can be used until the expiry date of the certificate. Certificates that are about to expire can also be extended according to the original certificate standards. -For certificates that have been extended for three years, technical changes and certificate information modifications can be made to the old standards (Ex: factory address, model... etc.). -If you re-apply through CB , IEC 62368-1 second edition can be acceptable, but the difference between the second and third editions will be listed in the CNS report. Astek switching power adapters are/meet with BSMI approvals. If you are interested in , please inquire us info@astekglobe.com. https://www.astekglobe.com/hot_367194.html BSMI Safety Approval for Switching Power Adapter In Taiwan 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_367194.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_367194.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_367194.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
  KC Mark Input voltage 220VAC Frequency 60Hz AC plug    KC (Korean Certification) KC (Korea Certification) certification, formerly known as EK certification, is the Korean electrical and electronic appliance safety certification system. KC approval was established by the Korea Institute of Technology and Standards (KATS) in 2009 according to the "ELECTRIC APPLIANCES SAFETY CONTROL ACT".   In order to avoid double certification, EMC and Safety will be managed separately from July 1, 2012. For safety approval for electrical and electronic products, they must obtain KC certificates. If electromagnetic compatibility (EMC), they process for KCC certificate (new MSIP). There are 2 KC-certified qualification agencies, Korea Testing Certification (KTC) and Korea Electrical Testing Institute (KTL). They are not only KC's certification agencies, but also qualification testing laboratories. In terms of safety standards, before all products importing to Korean market, they need to comply with the Korean K safety standard (similar to the IEC standard). It must meet the requirements of South Korea on IEC standards. National differences can be discover in the announcement in the IECEE CB system. In terms of EMC, the Korean EMI standard is similar to the CISPR standard, and the EMS standard is similar to the EN standard.   According to the requirements of the latest "Electrical Appliances Safety Management Law", and according to the different levels of product hazards, KC certification is divided into compulsory safety certification, self-discipline safety certification and supplier self-confirmation. Among them, compulsory safety certification controls products that are more dangerous High, the supplier self-confirms that the product under control is less dangerous.If you need power adapters with KC certification, please contact us info@astekglobe.com asap.  https://www.astekglobe.com/hot_365189.html KC (Korean Certification) for power adapters 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_365189.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_365189.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_365189.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
        KMEPS Mark                   Pass E-standby  Fail E-standbyKorea Energy Efficiency System MEPS/E-standby/HECP In order to popularize and expand energy green and environmentally friendly power supplies, save energy, reduce carbon and reduce greenhouse gas emissions, and enable consumers to purchase energy-efficient power supplies first, South Korea has introduced an energy efficiency certification system since the 1990s. Its control agency is KEMCO (Korea Energy Management Corporation), and the testing agencies mainly include KTL and KTC. The power supply needs to comply with KMEPS regulations. According to the adapter and standard, there are three main categories:1. Energy efficiency rating system MEPSThe power supply is divided into 1 to 5 levels according to energy efficiency and energy usage. The lower limit of energy efficiency is the obligation system applicable to the Minimum Energy Performance Standard (MEPS: Minimum Energy Performance Standard).The Korean government has introduced a mandatory energy efficiency registration and marking system in 1992, using minimum consumption efficiency standards (MEPS) 1-5 labels to identify adapters. In order to expand the popularization of energy-saving power supplies, the energy consumption rate rating system assumes the following three obligations for domestic manufacturers (domestic) and domestic importers (imports): ① Obligation to affix energy consumption rate rating labels; ② Obligation to declare adapters; ③ Required Meet the minimum consumption rate standards, etc.2. E-standby with low power consumption systemThe South Korean government has also introduced the E-Standby certification system that has been gradually mandatory since 1999.The standby energy saving warning sign (yellow) shall be affixed to the power supply that does not meet the standard requirements. On the contrary, if it is satisfied, an energy saving sign (smile sign) is added.3. HECP, a high-efficiency energy equipment systemThe Korean government introduced the voluntary High-efficiency Appliance Certification program in 1996, which is a certification system that evaluates the inspection results of energy efficiency and quality tests and requires that they meet certain standards. If you have a demand for Korea's energy efficiency system MEPS/E-standby/HECP, please contact us at info@astekglobe.com. https://www.astekglobe.com/hot_365885.html Korea Energy Efficiency System MEPS/E-standby/HECP 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_365885.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_365885.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_365885.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
External switching power adapter used in Malaysia Vin: 230VAC Frequency: 50Hz Plug: UK plug Malaysia Safety Certification-SIRIM on Switching Power Supplies   Malayisa ST COA (Certification of Approvals) is the mandatory Safety certification controlled by Malaysia Suruhanjaya Tenaga (Abbreviation: ST). Switching power supplies is listed on the controlled products. According to “Electricity Supply ACT(1990)” and “Electricity Regulations(1994), before importing to Malaysia market, the controlled product must be in the compliance of COA, including power supply units.   In Malaysia, SIRIM Berhad is the authorized safety setting standard organization, which is the governmental and non-profit company. It is restructured by Malaysia governmental Standard organization and Standard of Industrial and Research Institute in Malaysia (SIRIM). SIRIM QAS INTERNATIONAL SDN BHD is Malaysia's leading certification, inspection and testing organization, which is 100% owned to SIRIM Berhad. Malaysia Standard (MS standard) is based on IEC standards . Since Jan. 1 of 2015, when importing to Malaysia, the local importers have to affix two alternative laser anti-counterfeiting labels on the products, not on the package. When clearing the customs, importers take COA as clearance document having batch application to purchase MS label from SIRIM. 1.SIRIM label    1) See the left above SIRIM label; Product Certification Scheme (PCS), it’s affixed in the factory when applying and passing the factory inspection. Due to high costs, it’s adopted by huge regular importation. 2) At the right above label; Batch testing scheme(BTS): It’s for batch application to purchase from SIRIM for small and batch quantity importers. It doesn’t need factory inspection, but sampling inspection.   2.SIRIM Mark is used: If the products are categorized to PCS certification or no enough space to stick the above labels.  Astek power supplies are in accordance with SIRIM approvals. If you are interested in or any questions, please contact us info@astekglobe.com. https://www.astekglobe.com/hot_363782.html Malaysia Safety Certification-SIRIM on Switching Power Supplies 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_363782.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_363782.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_363782.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
External switching power adapter used in Singapore Vin: 230VAC Frequency: 50Hz Plug: UK plug Singapore Safety Approval PSB on External Power Supplies PSB certification is supervised by the Singapore Standards, Productivity and Innovation Board (Spring in abbreviation), who take in charge of customer protection on safety requirements, CPS Scheme, to assure the safety of consumer appliances, electronics, gas appliances and products. If listed on controlled goods, including adapters, it must comply with safety standard requirements, and mandatory application for PSB approvals. Before importing to Singapore, Sigapore registered companies must be the Holder of PSB certification; no inspection and annual fees.   Now, it’s only requested safety tests based on IEC standards and also meet with tropic condition tests.   From April 1, 2018, SPRING Singapore and International Enterprise (IE) Singapore merged to become Enterprise Singapore. The relevant requirements are changed as follows: 1. Products registered after April 2, 2018 must use the new SAFETY Mark (such as the attached picture), and the color code is Pantone 032C. 2. Products registered before April 2, 2018 must be updated to the new SAFETY Mark before April 2, 2019.  Astek power adapters are in accordance with PSB approvals. If you are interested in or any questions, please contact us info@astekglobe.com. https://www.astekglobe.com/hot_364005.html Singapore Safety Approval PSB on External Power Supplies 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_364005.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_364005.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_364005.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
 Argentina S-mark safety approval on Switching Power Adapters   The Input voltage in Argentina is AC220V/50Hz, and there are two types of plugs, which are classified into Class I for grounding and Class II for ungrounded. The plug of the power cord should be verified by IRAM or TUV Argentina S-Mark.   According to the 92/98 resolution that took effect in 1998, Argentina implements S-Mark compulsory certification for electrical and electronic equipment with an input voltage within the range of AC 50-1000 Vac or DC 50-1500 Vdc. The resolution divides the products into 4 groups, which will be implemented step by step from 2001 to August 1, 2004. All products must obtain S-Mark certification before entering the Argentine market.   Argentina is in CB membership, that is, it can be applied through CB, which can save time and expenses of repeated testing and sending samples. In addition, S-Mark certificate will have sampling inspections from the market and annual factory inspections every year, but if CIG 023 factory inspection reports are available, work inspections are not required. Moreover, an annual fee will also be charged every year.   The Argentine government now strictly implements 197/2004, paragraph 7 regulations, so when applying certificates, the following should be paid attention to:   Models with variables are not acceptable. Neither are Commercial code. Only single Model No. without variables are allowed to be listed on the S mark certificate. For issued certificates in the past, the commercial code will be deleted from the Argentine S mark approvals during the next market surveillance inspection or when a new certificate is renewed. The names of the terminal product will be shown at the top of the Argentina certificate, which confirmed with the customer.   Astek power adapters are with/meet Argentina S mark approvals. Any requirements, please feel free to touch us info@astekglobe.com https://www.astekglobe.com/hot_367454.html Argentina S-mark safety approval on Switching Power Adapters 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_367454.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_367454.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_367454.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
   Israel safety Approval about Switching Power Adapters   According to Israel's Standards Act of 1953, The Standards Institution of ISrael (SII) is Israel's official standards agency. SII is a non-governmental organization, but it is directly managed by the Israeli government. Under the leadership of the Israeli Ministry of Industry, Trade and Labor (Ministry of Industry and Trade), it is responsible for standard setting, certification and product testing to ensure that products produced or imported in the country meet quality requirements . So far, SII has promulgated and implemented as many as 3000 Israeli standards, and the standard code is represented by "IS". For controlled electronic and electrical products, in accordance with regulatory requirements, starting from January 1, 2005, SII certification must be applied for and obtained as a customs clearance and sales pass.   For most of the IEC standards, SII accepts the IECEE mutual recognition system for electrical product test certificates. According to the CB Scheme rules, SII accepts and recognizes CB reports and CB certificates, and only needs to test whether it meets Israeli differences and additional requirements (including EMC certification standards).   Announcement of The standard Institution of Israel-SII, launched on March 1, 2019, besides acceptance IEC 60950-1 CB report application standard SI 60950-1, also accepting to re-apply SI 62368-1 Certificate through IEC 62368-1 : 2014 2nd Edition if Israeli Differences added into CB Report. Promulgation of the Ministry of Industry, Economy of Israel, from December 20, 2020, SI62368-1 Standard takeover SI60950-1 and SI60065.   Certification program: SII product test + SII first factory inspection + SII annual factory inspection = SII certificate Voltage frequency AC230V, 50Hz, plug SI 32 Mandatory: mandatory + voluntary Certificate validity period: 1~4 years, based on product Factory inspection requirements: only SII standard certification requires factory inspection Requirements for the holder: a local agent is required   Astek switching power supplies are/meet with SII (SI62368-1 Standard). If you are interested in, please touch us info@astekglobe.com. https://www.astekglobe.com/hot_368034.html Israel safety Approval about Switching Power Adapters 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_368034.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_368034.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_368034.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
SASO about Switching Power Supplies SASO is the abbreviation of the English Saudi Arabian Standards Organization. Many of the SASO standards are established on the basis of the safety standards of the relevant International Electrotechnical Commission (IEC) and other international organizations. Like many other countries, Saudi Arabia has added some unique items to the standard according to its own country's civil and industrial voltage, geography and climate environment, ethnic and religious habits. The Saudi Arabian Ministry of Industry and Commerce and SASO require all products included in SASO identification standards to have SASO identification certificates when entering Saudi customs. Products without SASO certificates will be rejected by Saudi port customs. SASO authorizes the designated issuing authority to issue CoC certificates. Before custom clearance, the exporters have another three alternatives:1. Pre-shipment Compliance Verification (Pre-shipment Compliance Verification)This method is most suitable for exporters or manufacturers with very few shipments. Before each shipment, you need to apply for pre-shipment inspection and pre-shipment test. CoC certificate can be obtained if both are qualified.2. Product Registration (Registration)This method is suitable for most customers. Its advantage is that every shipment inspection is necessary, but each batch of shipment does not need to be tested before shipment. Customers can obtain the Statement for Registration (SfR) by submitting a declaration of compliance, providing a test report that meets the importing country and relevant international or domestic standards, and stating that the product has met the basic requirements of the importing country and national differences.3. Type Approval LicensingThis method can not only save the inspection fee or test fee before each shipment, simplify the repeated application procedure, but also guarantee the delivery time. Therefore, some of the shipments are more frequent or larger, and the quality and reputation are more important. Favored by the company. The exporter or manufacturer's products can only obtain the Statement for Licence (SfL) certificate if they fully comply with the mandatory standards of the importing and exporting country. The certificate is valid for one year, and the renewal of the factory inspection report and annual fee must be submitted before expiration, and it can be renewed after being reviewed by RLC. The products that have obtained the SfL certificate no longer require pre-shipment inspection (PSI) for each batch of goods, but are reduced to a few random inspections a year (usually 2-3 times/year, depending on the product status). From November 1, 2019 (the original official announcement of the mandatory date is May 1, 2019), it is mandatory to implement information products and audio-visual products into the low-voltage equipment regulations. Products exported to the United Arab Emirates must obtain a certificate before they can be sold locally.On December 1, 2020, the implementation of UAE.S IEC 62368-1 and replace UAE.S IEC 60065. UAE.S IEC 60950-1 two standards. Astek switching power supplies meet SASO. If you are interested in, please touch us info@astekglobe.com. https://www.astekglobe.com/hot_377161.html SASO about Switching Power Supplies 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_377161.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_377161.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_377161.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
    input Voltage: 220VAC Frequency: 50Hz AC plug:   EAC(Power Supplies safety for Russia, Belorussia, Kazakh) Regulated by Customs Alliance According to the agreement signed by Russia, Belarus, and Kazakhstan on October 18, 2010, the "Common Norms and Rules on the Technical Specifications of the Republic of Kazakhstan, the Republic of Belarus, and the Russian Federation", the Customs Union Commission is committed to formulating uniform standards and requirements to ensure product safety. A certification to three countries, thus forming the CU-TR certification of the Russian-Belarusian-Kazakh Customs Union and unified mark as EAC. Technical regulations of the Customs Union conformity certificates / declarations of conformity (referred to as Custom Union TR Certificate, or CU-TR, CU certification), the Customs Union TR certificate is also called EAC certification because the mark is EAC. In order to make trade between the Union countries easier, and to avoid technical and regulatory barriers to import and export products in this customs union, the Customs Union legislates to issue mandatory Customs Union TR technical regulations certificate, which is applicable to: Russia, Belarus, and Kazakhstan. From February 15, 2013, it is mandatory to apply for CU-TR certification for products within the certification scope of the Russian-Belarusian-Kazakhstan Customs Union (CU). As of March 15, 2013, Russia, Kazakhstan, and Belarus have stopped issuing GOST certificates under their old regulations. EAC Regulations The Technical Specification Directive certified by the Customs Union was formally implemented on February 15, 2013, and the certificate is valid for a maximum of 5 years. It will gradually replace the original certification systems of each member country, such as Russia’s GOST-R certification, GOST-TR certification, Kazakhstan’s GOST-K certification and Belarus’ GOST-B certification, and conduct unified certificate filing management. EAC TP TC004 regulations are for low-voltage equipment under the Russian EAC certification system are aimed at ensuring the safety of low-voltage equipment in use. It is suitable for electrical equipment between AC 50V~1000V and DC 75V~1500V, covering all electrical equipment or some equipped fixed electrical device that was implemented from 2013/2/15. Application Time: DOC compliance statement 1 week               COC certificate of conformity 1 month For more questions about EAC on power supplies, please contact us info@astekglobe.com asap.   https://www.astekglobe.com/hot_204398.html EAC 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204398.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204398.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_204398.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
Leakage current on Switching Power Supplies In order to make people power on power supply units safely, one of the critical factors is leakage currents. When the current overflows through the insulation resistance, it is called Leakage current. When the leakage current is contacted by the human body, the current flows through the human body and then flows to Earth, causing electrical damage. The difference between the leakage current test and the withstand voltage test and the ground protection test is that the device is tested under operating conditions. A human body analog impedance circuit is added to the leakage current test to simulate the leakage current through the human body under real conditions. The leakage current standard categorized into Class I, Class II and Class III by the types of Insulation, which derived from the IEC system. Now, we list as below: * CLASS I means that the product's protection against electric shock not only depends on basic insulation, but also includes grounding. Its leakage current limits Max.0.75 mA for the handheld and 3.5mA for the other equipment. * CLASS II means that the product's protection against electric shock not only relies on basic insulation, but also includes additional safety measures such as double insulation or reinforced insulation, but without grounding or protection depending on the installation conditions. The Max. leakage current is 0.25 mA. * CLASS III means that the product's protection against electric shock depends on the power supply voltage as the safety extra low voltage (SELV), and no dangerous voltage is generated therein. Astek Power Supplies pass the tests of leakage current and relative green power regulations because we care about the safety and environments. Any inquiries, please touch us asap. https://www.astekglobe.com/hot_318501.html Leakage current on Switching Power Supplies 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_318501.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_318501.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_318501.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
                  PFOSOur power supply units are PFOS compliance. If you are interested in, please inquire through info@astekglobe.com asap. Here come the PFOS regulations.    Directive 2006/122/EC PFOS has a potential for wide range environmental transport and the potential to produce adverse effects and therefore fulfill the criteria for being considered as persistent organic pollutants(POPs)   POPs (Persistent Organic Pollutants) are chemical substances that persist in the environment, bioaccumulate through the food web, and pose a risk of causing adverse effects to human health and the environment.   PFOS on 2006/122/EC May not be placed on the market or used as a substance or constituent of preparations in a concentration equal to or higher than 0.005% by mass.   May not be place on the market in semi-finished products or articles, or parts thereof, if the concentration of PFOS is equal to or higher than 0.1% by mass calculated with reference to the mass of structurally or micro-structurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is equal to or higher than 1µg/m² of the coated material. https://www.astekglobe.com/hot_217860.html PFOS 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_217860.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_217860.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_217860.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
   Power factor correction(PFC)Power Supplies with PFC function is for power saving which will less the waste and consumption of Power Performance. Mostly, we will add PFC circuit on the layout of power supplies over 90Watt.  Let's introduce PFC briefly. Power factor correction is an adjustment of the electrical circuit in order to change the power factor near 1. Power factor near 1 will reduce the reactive power in the circuit and most of the power in the circuit will be real power. This will also reduce power lines losses.The power factor correction is usually done by adding capacitors to the load circuit, when the circuit has inductive components, like an electric motor. Power factor correction calculation The apparent power |S| in volt-amps (VA) is equal to the voltage V in volts (V) times the current I in amps (A): |S(VA)| = V(V) × I(A) Any power supplies requirements with PFC function, please inquire us info@astekglobe.com asap.  https://www.astekglobe.com/hot_204802.html PFC 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204802.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204802.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_204802.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
    LVD LVD(Low Voltage Directive, 2006/95/EC) established in 1973, which 20years prior to Directive and regards as the forerunner of New Approach concept. It defines the electronic equipment about 50~1000VAC or 75~1500VDC, whose purpose is making sure the safety when users use them. Also, the time to set up LVD is earlier than CE. CE is the New Approach draft by EU. Directive 93/68/EEC amend LVD to meet the present demand. According to it, manufacturers or Representatives in EU can write Document of Conformity(DOC) and Mark CE logo for declare her products meets LVD and the relative regulations.Our products are with LVD compliance. Any inquiries, please touch us info@astekglobe.com https://www.astekglobe.com/hot_204638.html LVD 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204638.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204638.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_204638.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
    LPSLPS means  Limited Power Sources. Please refer to IEC60950. There are two types, one is inherently Limited Power Sources, another non-inherently Limited Power Source. If former, its output current less than 8A/100VA. If latter, its current limits fuse shall no more than 5A.  In IEC60950 standard, it asks fire-free enclosure for IT products. However, if its power supply meets LPS and its electrical components insets on V1 (or better than V1) PCB, this product no needs the fire-free enclosure, that is, only HB grades one. HB grades enclosure is cheaper, better physics character, and also meets environmental requirements.  That's why customer demand LPS for power supplies. If any inquiries about LPS power supplies, please contact us info@astekglobe.com asap. Thank you.  https://www.astekglobe.com/hot_204399.html LPS 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204399.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_204399.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_204399.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
It's our pleasure to announce our products are with safety certificates as below. https://www.astekglobe.com/hot_254057.html safety mark 2024-03-10 2025-03-10
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_254057.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_254057.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-10 http://schema.org/InStock TWD 0 https://www.astekglobe.com/hot_254057.html
Astek catch your demand on Power Supply Astek catch Your Demand on Power Supplies ' https://www.astekglobe.com/Deutsche ”https://www.astekglobe.com/sp” ”https://www.astekglobe.com/fr” ”https://www.astekglobe.com/jp” "https://www.astekglobe.com" ”https://www.astekglobe.com/cn” ” https://www.astekglobe.com/zh” ”https://www.astekglobe.com”