Astek Book
Story about Medical Power Supply4
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan
AC DC Switching Power SupplyEvery day, we need electricity to power on the daily devices. Let’s see how it work. After the power plant sends thousands of AC high voltages of 20,000 volts, it is stepped down to 100V and 200V through the transformer in the pole before being sent to the general household. The outlet in the house supplies AC power, so after the AC/DC power supply conversion circuit, the DC power is supplied to the household appliance.The type we insert into the appliance is open frame power supply. Another with a plastic case, AC plug/AC inlet and DC connector is power adaptor. As to the usages, there are IT switching power supplies, medical power supply units, battery chargers, USB chargers and DC DC car adaptors. These are on Astek’s power supplies product lists.About the switching power supplies design, at the initial stage, the required specifications must be confirmed.1. Input voltage range, output voltages/currents2. Standby power3. Max./min./cooling temperature4. The allowable area/heights in size5. Necessary protection: such as overcurrent, overvoltage, and over temperature6. Special environments/application: like used in tropic zone or with aerospace…7. CostsEvaluation and trial1. Use evaluation board / work2. Make a test board, run under preset conditions and evaluate performance3. Debugging, optimization4. Distinguish Compliance / non-compliance with specifications and safety standards.5. Reserved space for modification and upgrade by customers’ demand or when new safety standards enforced.When evaluating, carefully check the output voltage, load current, temperature upper limit, etc. If the design is not able to withstand the temperature, it is easy to deviate from the required specifications during mass production, or because the batch affects the yield. The characteristics of the components that make up the circuit are different, so it is important to understand the characteristics of the part and design an article that meets the specifications. During this period, it’s critical to choose the right components, power supply layout and circuits.After then, the design of power supplies is closed to complete and initiate the mass production. Before the shipments, our factory will inspect with Chroma and 100% burn-in tests.Any inquiries, please feel free to touch us. https://www.astekglobe.com/hot_317390.html AC DC Switching power supplies 2020-11-26 2021-11-26
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_317390.html
Astek Globe 9Fl-1., No. 428, Chung Hsiao E. Road, Xizhi Dist., New Taipei City, Taiwan https://www.astekglobe.com/hot_317390.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2020-11-26 http://schema.org/InStock $NT 0 https://www.astekglobe.com/hot_317390.html
Astek catch your demand on Power Supply Astek catch Your Demand on Power Supplies '



Story about medical power Supply

There are two main users of medical power supply: one is patient, another operator. The operator is more professional to use.  So, at IEC60601-1 3rd edition, MOP (Means of Protection) distinguished MOPP(Means of Patient Protection) and MOOP (Means of Operator Protection) with the following details:





















The medical power supply manufacturer shall make sure if the patient touch this medpower. If yes, this medpower has to meet MOPP insulation.

 Whichever MOPP or MOOP, primary to secondary is 2*MOP, primary to FG (frame ground) at least 1*MOP.

Astek medical power supply is with MOOP and MOPP. If you are interested in, please inquire us asap. Thank you. 

Previous Back to List Next