ATP460-D Dual output Open Frame Power Source
*Input: 90~264VAC Output:12V/5A,54V/7.34A *Small Size: 3" * 5"* 0.9" footprint design *Compact size*High
Efficiency*Industrial power supply *UL, cUL, CB, CE *UL/EN/IEC62368-1, UL/EN/IEC60950-1 *One year warranty
ATP460-D Dual output Open Frame Power Supply
*Industrial Power Supply
*Medical Power Design Also Provided
*Small Size: 98.9 * 187.8 * 34mm footprint design
*meet 80plus Gold
*UL/EN/IEC62368-1, UL/EN/IEC60950-1
*Application: Industrial, Printer, Network System, Telecommunication and Storage System.
Input Voltage: 90-264VAC
Frequency: 50/60Hz
Input current: @115VAC 6Arms;@230VAC 3Arms
Inrush Current: Cold Start @115VAC< 50A p-p; @230VAC< 100A p-p
Part No Output 1 Output 2
ATP460-D1254 12V/5A 54V/7.34A
12V_PG: 3.3V/1mA 54V_PG: 3.3V/1mA
1. Load Regulation is tested at 0% to 100% of rated load.
2.Output Power with 23.5CFM fan: 460W max.
3.Peak-to-peak 400.03W(54.5V) for PoE ports and 60W for system operation (with 23.5CFM Fan)@115VAC Min; Measurements with 20MHz bandwidth and terminated with 22µF electrolytic Cap. in parallel with 0.1µF ceramic Cap.
*PS ON Signal: The system has to provide a low active signal, which is TTL compatible, to enble 54.5V.
Level of Low logic voltage: +0.66V max.
Level of high logic voltage: +2.97V~ +3.63V
Line Regulation: +/- 1%
Ripple Noise(mV p-p): 150 @12V, 540 @54V
Efficiency: 87~88%
Turn-On Turn-off Time (full load @115VAC) < 3sec
Safety Ground Leakage Current (Class I @230VAC 50Hz) <3.5mA
Withstand(Isolation) Voltage: (UL60950-1; EN60950-1 2nd)
4242VDC, 1minutet from Input to (L1 & L2)Output <10mA
2636VDC , 1minutet from Input to (L1 & L2)Output <10mA
Insulation Resistance
Input (L1 & L2) to Output @DC 500V >100MΩ
Input (L1 & L2) to Earth @DC 500V >100MΩ
Over Voltage Protection: V1 & V2 160%+/-20%(no load)
Over Load Protection: 110%~200%, V1-auto recovery, V2-latch
Short Circuit Protection: V1-auto recovery, V2-latch
Operating Temperature: 0-50 degree C
Derating Output (50~70°C): -2.5% per °C
Storage Temperature: -40~85 degree C
Storage Humidity: 5% ~ 95% RH
Safety and EMC: UL, cUL, CB, CE
spec Attached: ATP460-D.pdf